Start with the rock, not the brochure
Arabian shield granite and basalt typically run 150–250 MPa with high silica — among the most abrasive common quarry rocks. Two consequences: jaw plates in high-manganese Mn18 rather than standard Mn13, and a conservative capacity rating. A jaw advertised at 200 t/h on limestone may honestly deliver 130–150 t/h on Saudi granite. We size for your rock, and we'll say so in the quotation.
Heat changes the specification
- Bearings and lubrication: grease life halves at desert temperatures; specify high-temperature grease and, on larger units, consider oil-bath bearing arrangements.
- Motors and electrics: motors derate above 40°C ambient — we fit the next frame size up for Gulf duty as standard.
- Dust sealing: sand ingress kills bearings faster than rock does. Labyrinth seals plus grease purging are worth specifying explicitly.
Sizing to the duty
| Quarry output target | Typical primary | Notes for Saudi duty |
|---|---|---|
| 80–120 t/h | PE 600×900 | Most common contractor size; road-legal mobility possible |
| 150–250 t/h | PE 750×1060 | Standard for dedicated project quarries |
| 300–500 t/h | PE 900×1200 / 1200×1500 | Giga-project supply; plan foundations early |
Logistics and compliance
- Jeddah Islamic Port serves western projects; Dammam the east — inland haulage for a 60-tonne crusher needs route planning, not an afterthought.
- SABER certification applies; we prepare the conformity document set with the machine.
- Spares: hold one jaw-plate set and one bearing set on site — shipping downtime costs more than the spares.
See the machines
Sourced and inspected in Gongyi
- Sourced in Gongyi. Machines are built at qualified Gongyi-area plants we select and coordinate in Gongyi, Henan — with clear specs and transparent pricing.
- Test-run before shipment. Every line is trial-run or inspected at the plant before dispatch; you receive video evidence with the inspection report.
- Spare parts from stock. Wear parts and standard components ship with the machine, with manufacturer stock behind every order.
- 12-month warranty. Core machinery is covered for 12 months, backed by ongoing technical support coordinated by our team.
Get a factory quotation
Send us your raw material, target capacity and destination port. Our engineers will reply with a matched configuration, ex-works price and production schedule.
Request a machinery solution ↗