Looking for mineral processing equipment sourcing from Gongyi? Gongyi Machinery is a procurement coordinator—we match your ore duty to qualified Gongyi-area partner plants, then coordinate configuration, pre-shipment inspection and export documentation. We do not manufacture machines in our own factory, and we do not sell “factory-direct from our plant.”
This page updates `/equipment/mineral-processing/` for buyers who need a beneficiation / mineral-processing line (or key modules) coordinated from Gongyi—not a catalogue of invented tonnage case studies.
Who we are (procurement coordinator)
Gongyi Machinery sits in Gongyi, Henan, China. Our job is sourcing coordination:
- 1. Translate your feed, product targets and capacity into a block-diagram scope
- 2. Match that scope to partner plants in the Gongyi area that can build it
- 3. Coordinate inspection evidence, packing and export paperwork against the Incoterm you choose
Public pages stay brand-agnostic. Specific plant names are shared in quoting, under NDA, or on an arranged visit—not as open-web advertising, and never with unauthorized competitor logos.
If you need crushing-only aggregate equipment, start with crushing & screening. If manufactured sand / washing is the goal, see sand making & beneficiation. This page is for mineral-processing / beneficiation duty—not a second crushing homepage.
Typical modules (block-diagram level)
A mineral-processing train is a sequence, not a single magic machine. Exact flowsheets depend on ore mineralogy, liberation size and target grade / recovery—we do not publish unverified “secret recipes” for named ores. At a block-diagram level, buyers usually discuss some combination of:
- 1. Crushing / pre-treatment — size the ROM or stockpile feed so mills and classifiers see a controllable top size (often overlapping with quarry crushing logic; see crushing page for stage detail).
- 2. Grinding — reduce particle size to liberate valuable minerals (ball / rod / other mill paths as the duty requires).
- 3. Classification — cyclones, screens or spirals to split size fractions and control circulating load.
- 4. Separation — flotation, magnetic, gravity or other paths as the ore allows—chosen after your mineralogical notes, not from a generic slogan.
- 5. Dewatering / concentrate handling — thickeners, filters, conveyors, packing or stockpile as specified.
- 6. Reagents & utilities — dosing, water, power and civil interfaces scoped with the plant partner (we coordinate; your process engineer owns the chemistry).
Capacities discussed in proposals are planning figures until feed assays, grind targets and duty cycle are confirmed. We will not invent “XX kt/year already shipped to Country Y” stories to fill missing data.
How we match plants to the duty
Useful RFQs answer five questions early:
| Question | Why it matters |
|---|---|
| What ore / feed? | Steers separation path and wear expectations |
| Feed size / moisture / clay? | Crushing–grinding front end |
| Target grade / recovery band (or product size)? | Whether the flowsheet is realistic |
| TPH (and hours/day if known)? | Mill, pump and thickener sizing |
| Single modules vs full line? | Quote scope and layout |
We then shortlist partner plants that can build the agreed modules, keep public copy brand-agnostic, and share named options in private quote files as agreed. You are not asked to trust a vague “direct workshop” story with no inspection plan.
Inspection, packing, export docs
Before shipment we coordinate, with the partner plant:
- - Specification check against the agreed data sheet (models, motors, voltage, wear / spare list)
- - Trial run or structured inspection where applicable—video or on-site evidence, plus an inspection record you can keep
- - Packing suitable for ocean freight and inland haul to the load port
- - Export documents typically needed for customs: commercial invoice, packing list, and shipping docs aligned to your Incoterm; certificates arranged as agreed in the contract
Warranty and after-sales coverage for core machinery are set as agreed in the purchase contract, coordinated by our team with the supplying plant—not as a fixed brochure promise that pretends we own the workshop.
For the broader import checklist (voltage, Incoterm notes, first WhatsApp message), see importing machinery from China.
What to send for a quote
To return a coordinated sourcing proposal, send as much of this as you can (WhatsApp or the site request form):
| Field | Why it matters |
|---|---|
| Ore / mineral type (and any assay or mineralogy note) | Separation path |
| Feed size, moisture, clay / contamination | Front-end sizing |
| Target product metrics (grade / recovery band, or size) | Flowsheet realism |
| Required TPH (and hours/day if known) | Capacity |
| Single machine / modules vs full beneficiation line | Scope |
| Voltage & frequency | Motors / control |
| Destination port & preferred Incoterm | Logistics basis |
| Site constraints (footprint, water, power ceiling) | Layout reality |
Incomplete RFQs still get a reply; incomplete data produces indicative—not final—proposals. We chase missing fields instead of inventing case studies.
WhatsApp first-message template (copy/paste)
```
Hi — requesting a coordinated mineral-processing / beneficiation quote.
1) Ore / feed: ___ ; assay note: ___
2) Feed size: ___ mm ; moisture/clay: ___
3) Target grade/recovery or product size: ___ ; TPH: ___
4) Scope: single modules / full line
5) Power: ___ V / ___ Hz
6) Port: ___ ; Incoterm: ___
7) Inspection: video / third-party / visit
WhatsApp OK: +86 18695901333
```
FAQ
Do you manufacture mineral processing machines?
No. We coordinate qualified Gongyi-area plants, inspect before shipment, and handle export documentation. We are a sourcing / procurement coordinator—not a manufacturer.
Will you name the factory on the website?
No. Public pages stay brand-agnostic. Specific plant names are shared in quoting and visits as agreed. You will not see unauthorized brand marketing or competitor logos on this site.
What specs do you need for a beneficiation quote?
Ore type, feed size, target product metrics (grade / recovery band or size), TPH, power standard (voltage / Hz), destination port and Incoterm—plus whether you need a full line or selected modules.
CTA — request a sourcing proposal
Ready to send the duty list?
- - WhatsApp: +86 18695901333
- - Web: Request a sourcing proposal — wording like “Get a coordinated quote” is fine; never factory-quote wording.
- - Location: Gongyi, Henan, China
We reply with a coordinated configuration and sourcing proposal from the matched partner plant—not a generic factory price list with no inspection plan.
Related pages
- - Crushing & screening equipment (GY-1)
- - Sand making & beneficiation (GY-2)
- - Gongyi aggregate plant buying checklist (GY-3)
- - Importing machinery from China (GY-5)
- - Recycling & shredding sourcing (GY-6, when live)
- - Contact / request